Step by step method to clean chrome

surface of a faucet or fixture

You can wash the floor of your bathroom, clean the tub and shower, and disinfect the toilet, but if the faucets are clouded with mineral deposits, the bathroom will still look dirty. It doesn't have to be that way, because hard water deposits are surprisingly easy to remove, although you can't do it with plain water or even soap and water. These deposits are mineral salts, and you need to dissolve them with an acid. You can use a commercial lime-removing product, but white vinegar is just as effective, and you probably already have some.

Things You'll Need

  • White vinegar
  • Toothbrush
  • Spray bottle
  • Paper towels
  • Baking soda
  • Dental floss

Step 1: Mix a 1-to-1 solution of white vinegar and water in a small bowl. Dip an old toothbrush in the solution; use the toothbrush to scrub white deposits from your chrome faucet spouts and handles.

Step 2: Use full-strength vinegar for stubborn water stains. Spray it on with a spray bottle. Let it sit for 5 minutes to dissolve the mineral salts, and then scrub the stains with a toothbrush and wipe them off with a cloth.

Step 3: Soak a paper towel in vinegar and wrap it around a faucet with particularly stubborn stains. Leave the faucet covered overnight or until the white spots are gone.

Step 4: Pour some baking soda in a bowl, and moisten it with water to make a paste. Use this paste to scrub the faucet after you've finished treating it with vinegar. The baking soda treatment removes residual stains, and it neutralizes the vinegar so it doesn't etch the chrome. Wash the faucet with plenty of water when you're done.

Step 5: Polish the chrome with an automotive chrome-polishing product. Apply the polish with a soft cloth and buff it with another clean, dry, soft cloth.

Tips & Warnings

  • A commercial lime-removing cleaner will do the same job as vinegar. Follow the directions on the container for best results.
  • Use dental floss to get soap scum and other dirt from hard-to-reach areas around the base of the faucet, or between the handles and the faucet body. After you loosen the dirt and get it out in the open, rinse the faucet with water to wash the dirt away.
  • Avoid any type of abrasive cleaner or any cleaner containing strong acid, such as phosphoric, hydrofluoric or hydrochloric acid. You should also avoid caustic cleaners and those that contain chlorine bleach.

Video Link: http://housekeeping.wonderhowto.com/how-to/remove-water-spots-from-chrome-288577/

Chrome is one of the hardest surfaces to get water stains off of, but it can be done easily. First, grab an empty spray bottle, vinegar, water, a rag, and a paper towel. Now, mix two parts of vinegar to one part of water and spray it onto the chrome item. Use the rag to wipe off the mixture, then continue to spray on once more. Do this around five times total, then use a paper towel at the end for the finishing look! You can use this on a number of different surfaces, including chrome and glass.

If this does not prove to be effective, please follow the steps mentioned below:

Method -1

  • Combine baking soda and white vinegar in a bowl to make a paste. Again, the paste should be thick enough to stay on your chrome faucet and fixtures.
  • Apply the paste to the hard water stains and let it sit for several minutes. Use a damp cloth to wipe off the paste.
  • Wet a cloth with distilled water and wipe down the chrome. Use another dry cloth to thoroughly dry the chrome.
  • Inspect the fixtures for residual hard water deposits. Repeat Steps 2 and 3, if necessary.

Tips & Warnings

  • To prevent hard water deposits from building up, use vinegar to wipe down your chrome faucets and fixtures once a week as part of your cleaning regiment.

Method -2

Water stains on chrome faucets are caused by the natural abundance of minerals present in hard water. These minerals consist of calcium, magnesium, and iron, and can attach themselves to surfaces, such as chrome faucets. Iron particles can form rust-coloured stains on faucets, while calcium and magnesium particles usually form white, crusty residue on surfaces. If these water stains are not removed, they can permanently stain the chrome faucet. Water stains can be removed from chrome faucets by cleaning them with simple household materials.

Things You'll Need

  • White vinegar
  • Water
  • Bowl
  • Thick paper towel
  • Soft cloth
  • Sequestrate cleaning product
  • Eye protection
  • Gloves
  • Strong acid cleaner

i. Combine together equal amounts of white vinegar and water in a bowl. White vinegar contains high levels of acidity, which is effective at removing stains on most surfaces.

ii. Soak a thick paper towel in the vinegar and water solution. Gently wrap the paper towel around the chrome faucet and leave it on for several minutes to dissolve the stains.

iii. Unwrap the paper towel from the faucet, and rinse the faucet thoroughly with water. Dry off the chrome faucet with a soft cloth.

iv. Remove any lime scale stains caused by hard water minerals by cleaning the chrome faucet with a sequestrate cleaning product according to the manufacturer's directions.

v. Sequestrate cleaning products bind with the minerals causing the stains, preventing the minerals from forming further stains.

vi. Try a strong acid cleaner with diluted hydrochloric acid as an ingredient to remove the water stains on the faucet, if nothing else works.

vii. Apply the acid cleaner by following all the directions provided by the manufacturer, and do not mix it with any other cleaning product.

Tips & Warnings
  • All-purpose cleaners can be used to remove water stains from chrome faucets.
  • Clean chrome faucets at least once a week to prevent water stains from building up.
  • Wear eye protection and gloves while using sequestrate cleaning products and strong acid cleaners.

Method -3

The natural minerals found in hard water leave pesky water stains on household fixtures. Combining two common household softening agents will break down those hard water spots. If white vinegar and warm water has not worked for you, try the steps outlined below for a quick and simple fix.

Things You'll Need

  • Rinse agent used in dishwashers
  • Fabric softener sheets
  • Water
  • Paper towels
  • Microfiber cloth (optional)

i. Notice hard water spots on chrome fixtures and decide to take action. Shower and bathroom fixtures are the most common hard water havens, but this method will work on any chrome surface.

ii. Combine softening agents. Place several drops of the dishwasher rinse agent on a new fabric softener sheet. Apply to the chrome in a circular pattern. Cover the affected area several times.

iii. Rinse and repeat. Use a wet paper towel to rinse off the chrome. Use a dry paper towel or a microfiber cloth to dry and buff the fixture. If the shine has not returned, repeat the process until satisfied.

Tips & Warnings

  • For daily touch ups, retain used fabric softener sheets and use them on fixtures for quick maintenance.
  • After showering, use a microfiber cloth to wipe down all fixtures. This prevents water spots from developing.
  • Wear gloves if you have sensitive skin.